Main Content Section
Training tomorrow’s
workforce today.
662.887.2876
Classes
Aviation Maintenance Training
Dates: TBA
(16-week course) Aviation Sheet Metal focuses on teaching basic aircraft structural skills. Students spend time in the classroom learning terminology, tools, equipment, blueprint reading and shop safety before moving into the shop for hands-on experience.
Carpentry
| Dates: | January 14, 2025-April 24, 2025 |
| Registration starts: | November 12, 2024 at 9:00am |
(14-week course) Training topics include, but are not limited to, Safety Measures, Builder Math, Wall/Roof Framing, Siding/Roofing Installation, Proper use of hand tools, & Installing windows/doors. This class will meet on Tuesday & Thursday nights 6:00pm-9:00p.m.
Cost: $500
Contact Anjavette Payton, 662-445-1984, for additional information.
Commercial Driver’s License Training (CDL) Permit Prep Class
| Dates: | January 13, 2025-January 28, 2025 |
| Registration: | November 12, 2024 at 9:00am |
Three-week prep course. Prep topics will include three partsto the Class A CDL learner's permit exam. General Knowledge, Air Brakes, and Combination Vehicles. All three parts of the exam will be taken at your local DMV office. You must have your DOT physical in hand before a CDL learner's permit will be issued, even if you have passed all written tests. This class will meet on Monday and Tuesday nights 6:00pm-9:00pm
Cost: $100
Contact Anjavette Payton, 662-445-1984, for additional information.
Commercial Truck Driving
| Dates: | February 3, 2025-March 7, 2025 |
| Orientation: | January 22, 2025 at 5:00pm |
Six-week driving course. Trainee will learn how to properly operate the 18 Wheel Semi Trailer and prepare for testing to obtain CDL Class A License. Skills to be learned will include, Pre-Trip inspection, In-cab inspection, Air Brakes Check, Parking Brakes Check, Service Brakes Check, Straight Backing, offset (left and right), Parallel Parking (driving and conventional side), 90-degree Alley Docking and Routing Driving. Day class will meet on Monday-Thursday 9:00am-2:00pm Night Class will meet on Monday-Friday 5:30pm-9:30pm.
PRE-REQUISITE: Valid CDL Class A permit
Cost: $2,000
Contact Anjavette Payton, 662-445-1984, for additional information.
Electrical
| Dates: January 13, 2025-April 23, 2025 |
| Registration starts: November 12, 2024 at 9:00am |
This is a 14-week class where the student will learn basic electrical skills in either Motor Control or Residential. This class will meet on Monday & Wednesday nights from 6 p.m. to 9 p.m.
Cost: $700
Contact Anjavette Payton, 662-445-1984, for additional details.
Electrical Utility Lineman Program
| Date: January 13, 2025-May 5, 2025 |
| Registration: October 1, 2024-November 4, 2024 |
Qualified workers in this field are in demand. This 16-week, hands-on course is taught by instructors with lineman experience and specialized education.
PRE-REQUISITE: CDL Class A permit
Contact Jane Aden Burton, 662-445-1983, for additional admission requirements and/or
additional program details.
Emergency Medical Technician
| Dates: January 15, 2025-April 23, 2025 |
| Registration starts: November 12, 2024 at 9:00am |
(14-week course) The EMT program provides classroom and laboratory instruction for entry level Emergency Medical Technicians following the current National DOT curriculum. Emergency Medical Technician-Basic is an instructional program that prepares individuals to function in the pre-hospital environment. The EMT-Basic program provides instruction in basic life support care of sick and injured persons. This includes airway assessment, communications, documentation, general pharmacology, hemorrhage control, ambulance operations, and splinting of adult, pediatric, and infant patients; and special care patients exposed to heat, cold, radiation, or contagious disease. This class will meet Wednesdays 10am-5pm.
A certificate of completion will be awarded to those who satisfactory complete the EMT curriculum. Upon successful completion of the course, students are eligible to sit for the National Registry for Emergency Medical Technicians Basic Testing.
Cost: $900
Contact Anjavette Payton, 662-445-1984, for additional information.
Fiber Optic Training
| Dates: | January 13, 2025-May 8, 2025 |
| Registration starts: | October 1, 2024-November 21, 2024 |
This 16-week, hands-on course is taught by instructors with fiber experience and specialized education. Qualified workers in this field are in high demand. Trainee will receive a CDL Class A License upon completion. This class will meet Monday - Thursday 8:00 a.m. - 4 pm.
Cost: $500
Contact Dexture Applewhite, 662-445-1985, for additional admission requirements and/or additional program information.
Fiber Optic Training Application
HVAC
| Dates: | January 13, 2025-April 23, 2025 | ||
| Registration starts: | November 12, 2024 at 9:00am |
(14-week course) Training topics include: workplace ethics, theory of heat, safety, tools, equipment and shop practices, and prep for EPA certification. This class will meet Monday-Wednesday 6 p.m. to 9 p.m.
Registration fee: $800
Contact Anjavette Payton, 662-445-1984, for additional information.
Medical Administrative Assistant
| Date: January 14, 2025-May 6, 2025 |
| Registration starts: November 12, 2024 at 9:00am |
Learn how to keep a physician’s office or clinic running efficiently in this 15 week class. Medical Administrative Assistant will maintain patient’s records; coordinate collection and preparation of operating reports such as time and attendance. This class will meet Tuesday and Thursday nights 6 p.m. - 8 p.m.
Cost: $700 (Price subject to change)
Contact Jane Aden Burton, 662-445-1983, for additional information.
Pharmacy Technician
|
Date: January 13, 2025-May 5, 2025; Monday and Tuesday 6:00pm-8:00pm January 15, 2025-May 7, 2025; Wednesday and Thursday 6:00pm-8:00pm |
| Registration starts: November 12, 2024 at 9:00am |
(16-week course) Pharmacy Technicians are sought-after professionals in pharmacies located in hospitals, drug stores, doctors’ offices and grocery stores. This 16-week class will prepare you to take the Pharmacy Technician certification exam, ExCPT.
Cost: $850 (Price is subject to change)
Contact Jane Aden Burton, 662-445-1983, for additional information.
Plumbing
| Dates: January 14, 2025-April 17, 2025 |
| Registration starts: November 12, 2024 at 9:00am |
(13-week course) Training topics include: Workplace ethics, 101 Plumbing, safety, tools. Class meets Tuesday-Thursday; 6 p.m. to 9 p.m. at the Capps Center.
Cost : $600
For additional information contact 662-445-1985.
Welding
| Dates: January 13, 2025-May 8, 2025 |
| Registration starts: November 12, 2024 at 9:00am |
(18-week course) Learn about basic MIG, TIG, FCAW, and SMAW welding and safe work practices used at local industries. This class will meet Monday - Thursday nights 6 p.m. to 9 p.m.
Cost: $900 (includes welding tool kit to keep at the end of training)
For additional details including registration deadline, contact Dexture Applewhite,
662-445-1985.
Assessments
Career Readiness Certificate (CRC)
Three WorkKeys assessments resulting in a nationally recognized credential that gives
employers and job-seekers a standard measure of workplace skills. This certificate
will show the employer you will be easy to train for on-the-job skills.
There is a fee to test with a valid MS picture ID.
Contact Carole Stamps, 662-445-1980, for additional details.
Once you have registered, you will receive an email within 24 of a business day with testing date/details.
Automotive Excellence Service Certification (ASE)
By appointment
ASE promotes excellence in vehicle repair, service and parts distribution. Over a
quarter of a million individuals hold ASE certifications. Industry-recognized certification
for auto mechanics and technicians.
Contact the Capps Center at (662) 887-2876 for additional details.