Main Content Section
Training tomorrow’s
workforce today.
662.887.2876
Classes
Aviation Maintenance Training
Dates: TBA
(16-week course) Aviation Sheet Metal focuses on teaching basic aircraft structural skills. Students spend time in the classroom learning terminology, tools, equipment, blueprint reading and shop safety before moving into the shop for hands-on experience. This class will meet Monday-Thursday 8am-4pm.
Applications will be available April 15, 2024-May 30, 2024
Carpentry
| Dates: | August 20, 2024-November 20, 2024 |
| Registration starts: | July 8, 2024 at 9:00am |
(14-week course) Training topics include, but are not limited to, Safety Measures, Builder Math, Wall/Roof Framing, Siding/Roofing Installation, Proper use of hand tools, & Installing windows/doors. This class will meet on Tuesday & Thursday nights 6 p.m. 9 p.m.
Cost: $500
Contact Anjavette Payton, 662-445-1984, for additional information.
Commercial Driver’s License Training (CDL) Permit Prep Class
| Dates: | August 20, 2024 |
| Registration: | July 8, 2024 at 9:00am |
Three-week prep course. Prep topics will include, but are not limited to: Driving Safety, Transporting Cargo/Passengers Safely, Air Brakes, Combination Vehicles, Hazardous materials, Pre-Trip Vehicle Inspection, & Basic Vehicle Control Skills Test. This class will meet on Tuesday & Thursday nights 6 p.m. to 9 p.m.
Cost: $100
Contact Anjavette Payton, 662-445-1984, for additional information.
Commercial Truck Driving
| Dates: | August 19, 2024-September 28, 2024 |
| Registration: | July 8, 2024 at 9:00am |
Six-week driving course. Trainee will learn how to properly operate the 18 Wheel Semi Trailer and prepare for testing to obtain CDL Class A License. Skills to be learned will include, but are not limited to, routine driving, DOT regulations, backing skills, parallel parking, how to review maps and fill out log books, driving maneuvers as well as general driving behavior. This class will meet Monday, Wednesday, and Friday nights 5:00 pm - 9:30 p.m. and Saturday mornings 8 a.m. - 2 p.m.
PRE-REQUISITE: Valid CDL Class A permit
Cost: $2,000
Contact Anjavette Payton, 662-445-1984, for additional information.
Electrical
| Dates: August 19, 2024-November 18, 2024 |
| Registration starts: July 8, 2024 at 9:00am |
This is a 14-week class where the student will learn basic electrical skills in either Motor Control or Residential. This class will meet on Monday & Wednesday nights from 6 p.m. to 9 p.m.
Cost: $700
Contact Anjavette Payton, 662-445-1984, for additional details.
Electrical Utility Lineman Program
| Date: August 19, 2024-December 9, 2024 |
| Registration: May 6, 2024-June 6, 2024 |
Qualified workers in this field are in demand. This 16-week, hands-on course is taught by instructors with lineman experience and specialized education.
PRE-REQUISITE: CDL Class A permit
Contact Jane Aden Burton, 662-445-1983, for additional admission requirements and/or
additional program details.
Emergency Medical Technician
| Dates: August 21, 2024-November 20, 2024 |
| Registration starts: July 8, 2024 at 9:00am |
(14-week course) The EMT program provides classroom and laboratory instruction for entry level Emergency Medical Technicians following the current National DOT curriculum. Emergency Medical Technician-Basic is an instructional program that prepares individuals to function in the pre-hospital environment. The EMT-Basic program provides instruction in basic life support care of sick and injured persons. This includes airway assessment, communications, documentation, general pharmacology, hemorrhage control, ambulance operations, and splinting of adult, pediatric, and infant patients; and special care patients exposed to heat, cold, radiation, or contagious disease. This class will meet Wednesdays 10am-5pm.
A certificate of completion will be awarded to those who satisfactory complete the EMT curriculum. Upon successful completion of the course, students are eligible to sit for the National Registry for Emergency Medical Technicians Basic Testing.
Cost: $900
Contact Anjavette Payton, 662-445-1984, for additional information.
Fiber Optic Training
| Dates: | August 19, 2024-December 9, 2024 |
| Registration starts: | May 6, 2024-June 6, 2024 |
This 16-week, hands-on course is taught by instructors with fiber experience and specialized education. Qualified workers in this field are in high demand. Trainee will receive a CDL Class A License upon completion. This class will meet Monday - Thursday 8:00 a.m. - 4 pm.
Cost: $500
Contact Dexture Applewhite, 662-445-1985, for additional admission requirements and/or additional program information.
Fiber Optic Training Application
HVAC
| Dates: | August 19, 2024-November 18, 2024 | ||
| Registration starts: | July 8, 2024 at 9:00am |
(14-week course) Training topics include: workplace ethics, theory of heat, safety, tools, equipment and shop practices, and prep for EPA certification. This class will meet Monday-Wednesday 6 p.m. to 9 p.m.
Registration fee: $800
Contact Anjavette Payton, 662-445-1984, for additional information.
Medical Administrative Assistant
| Date: August 13, 2024-December 3, 2024 |
| Registration starts: July 8, 2024 at 9:00am |
Learn how to keep a physician’s office or clinic running efficiently in this 15 week class. Medical Administrative Assistant will maintain patient’s records; coordinate collection and preparation of operating reports such as time and attendance. This class will meet Tuesday and Thursday nights 6 p.m. - 8 p.m.
Cost: $700 (Price subject to change)
Contact Jane Aden Burton, 662-445-1983, for additional information.
Medical Coding
| Date: August 13, 2024-December 3, 2024 | |
| Registration starts: | July 8, 2024 at 9:00am |
This 15-week course introduces students to the fundamentals of medical coding. This class will teach you the guidelines to use the appropriate codes and how to utilize your coding books. This class is not for college credit. This class will meet Tuesday and Thursday nights 6 p.m. - 8 p.m.
PRE-REQUISITE: Anatomy and Physiology and Medical Terminology.
Cost: $925
Contact Jane Aden Burton, 662-445-1983, for additional information.
Pharmacy Technician
| Date: August 12, 2024-December 2, 2024 |
| Registration starts: July 8, 2024 at 9:00am |
(16 week course) Pharmacy Technicians are sought-after professionals in pharmacies located in hospitals, drug stores, doctors’ offices and grocery stores. This 16-week class will prepare you to take the Pharmacy Technician certification exam, ExCPT.
Cost: $850 (Price is subject to change)
Contact Jane Aden Burton, 662-445-1983, for additional information.
Plumbing
| Dates: August 19, 2024-November 14, 2024 |
| Registration starts: July 8, 2024 at 9:00am |
(13-week course) Training topics include: Workplace ethics, 101 Plumbing, safety, tools. Class meets Tuesday-Thursday; 6 p.m. to 9 p.m. at the Capps Center.
Cost : $600
For additional information contact 662-445-1985.
Welding
| Dates: August 2, 2024-December 9, 2024 |
| Registration starts: July 8, 2024 at 9:00am |
(18-week course) Learn about basic MIG, TIG, FCAW, and SMAW welding and safe work practices used at local industries. This class will meet Monday - Thursday nights 6 p.m. to 9 p.m.
Cost: $900 (includes welding tool kit to keep at the end of training)
For additional details including registration deadline, contact Dexture Applewhite,
662-445-1985.
Assessments
Career Readiness Certificate (CRC)
Daily throughout the Delta
Three WorkKeys assessments resulting in a nationally recognized credential that gives
employers and job-seekers a standard measure of workplace skills. This certificate
will show the employer you will be easy to train for on-the-job skills.
There is a fee to test with a valid MS picture ID.
Contact Mary Steelman, 662-445-1987, for additional details.
Once you have registered, you will receive an email within 24 of a business day with testing date/details.
Automotive Excellence Service Certification (ASE)
By appointment
ASE promotes excellence in vehicle repair, service and parts distribution. Over a
quarter of a million individuals hold ASE certifications. Industry-recognized certification
for auto mechanics and technicians.
Contact the Capps Center at (662) 887-2876 for additional details.